Plumbing Takeoff Tool
E-Deck ConstructIQ
| # | System | Size | Length (ft) | Fittings / 100 ft (auto-filled • editable) | Total Fittings | Notes |
|---|
Defaults shown below can be overridden per run.
Fitting Factors (Auto-Applied)
| Pipe Size Range | Allowance (fittings / 100 ft) | Typical Use |
|---|---|---|
| ½" – 1" | 5 | Small branches, fixture feeds |
| 1¼" – 2" | 7 | Medium branches, mains in small cores |
| 2½" – 4" | 10 | Larger branches, mains |
| 6" and larger | 12 | Major mains, transitions, flanged work |
These factors are applied automatically based on pipe size when you add a run. Edit the “Fittings / 100 ft” value if your spec/vendor differs.
Fixture Groups
| # | Group | Fixtures | Traps | Vent Ties | Cleanouts | Notes |
|---|
Default: 1 trap + 1 vent per fixture, and 1 cleanout per group (editable).